null https://www.hawaiiangunrack.com/pages/shipping-returns.html gtag('js', new Date()); gtag('config', 'UA-10613943-2'); bingtag Skip to main content

Installation guides

INSTALLATION GUIDES:

Generally most of our wall racks use the same principles except for the Vertical racks which is a single rack and only needs to be aligned with the wall stud. Please feel free to email us for a printable version if you prefer or if you have any questions.

VIDEO GUIDE LINK: https://youtu.be/pWVkkapr7bg?si=wFR9rf3V6VGU11fd

SURFBOARD & PADDLE BOARD INSTALL INSTRUCTIONS: for the surfboard, paddle board and OLO racks:

 

Instructions for the Vertical Rack: 

  1. Find the main wood stud on the wall where you want to display the surfboard centered over the stud.
  2. Determine the desired veiwing location of the surfboard in regard to it's low and high point on the wall.
  3. Mark the low point with tape.
  4. Place the rack on the low point using the 2 square braces as a guide.
  5. Mark the location of the attachment holes on the wall.
  6. Screw into place.
  7. Place the board on the rack and near the "shoulder" of surfboard - mark a spot on the wall about 1/4 inch to the left and right side of the edge of the board.
  8. Install the drywall anchor into these 2 marked spots and then screw in the dowel. This will keep the board from sliding left or right.

Please feel free to email us if you prefer a written guide with pictures.

 

!